|
|
Confirm stock wire
|
|
Pulling waire from handle side |
| |
 |
| |
| |
| Available for |
| ① |
Tam size is φ8 |
| ② |
Wire end size is φ8 |
| ③ |
Inner wire scale is between 40-50mm |
| |
If it is not applicable, change the tension on the engine side.
It can't be fit. if the above dimensions are not met even if the engine tension is changed.
|
|
| |
| |
| |
|
Choice the ratio
|
|
Confirm the distance for between center of pivot to wire tam.
Available from 28mm to 32mm
|
| |
 |
| |
| Our recommend to use same size as stock |
| （ It reduces the friction, so it is easy to be control at the same distance ） |
| |
 |
 |
| |
| |
| |
Confirm to switch |
| |
 |
| |
| |
| ・2 line type |
| |
Same as picture |
| |
⇒Don't need to processing |
| |
Different as picture |
| |
⇒Need to processing |
|
| |
| ・3 line type |
| |
⇒2 line from motocycle conect to terminal |
| |
(Should be hold clutch lever when you start engine) |
|
| |
|
| |
| |
| |
Confirm the clearance |
| |
That product is universal type so this have possibility toch to cowl, meter, some parts
|
|
| |
Wire clutch perch kit |
| |
 |
| |
Elaborate Wire clutch perch kit |
| |
 |
| |
| |
| |
| |
|
LINE UP |
