Rear mastercylinders are launched following our front master cylinders.
φ12 own design piston
The brake feeling would be hard and not effective by the ratio, in case opposed 2 piston rear caliper(Piston Φ32・Φ34) is installed.
GALE SPEED rear master cylinder has Φ12 piston and is developed to fit on the lever ratio of standard racing steps.
Rear brake system achieves more delicate and controllable touch.
A6061 3D machined body
It achieved lean form and high stiffness by 3D machining of forged aluminum body. The material is A6061 has high resist corrosion, and subjected to T6 heat treatment for strength increase.
Applicable to various bikes
Attachment brackets provide you a choice for various bikes. Transfering is available at low cost.
2 types return spring
Standard(Black) or hard(Red) feeling is selectable by rider's choice.
2 sizes 90°nipple is attached.
2sises of φ7.8 and φ9 are attached. They are changeable for the fluid tanks.
Nipple diameter
Fluid reservoir tank
Φ9
NISSIN
Φ7.8
GALESPEED/brembo
SPEC
color
Rod・Rodend
Mounting pitch
black/
brown
M6
40-49mm
45mm
49mm
(Offset 4mm)
M8
40-49mm
45mm
49mm
(Offset 4mm)
Piston size
Φ12
Fluid nipple(attached)
Φ7.8/Φ9 (90°)
Material
A6061-T6
Return spring(attached)
Standard(Black)/ Hard(Red)
Proccesing method
Forged Aluminum 3D machined body
Rod・Rodend
M6/M8
Surface finishing
Anodizing Black/Brown
Spacer(attached)
M8⇒M6 Conversion spacer
Mounting bolt size
M6
Caliper
Opposed 2 piston(φ32/φ34)
Reservoir tank
Separated
OPTION
Reservoir tank parts
Aluminum machined reservoir tank
The specified aluminum machined reservoir tank for rear master cylinder. 2 different angle types are on the lineup. They makes stylish views with no need for reservoir tank
