●If the distance between the brake lever and handlebar adjusted smaller, the rider's fingers may be trapped when pulling the lever, or the lever and handlebar may touch, preventing brake operation. Check that the brake operates properly before use. ● If the distance between the brake lever and handlebar adjusted larger, a part of the lever blade may touch the fairing when the handlebar is fully swinged. Check there is no touching before use. ●For hydraulic clutch mastercylinders, in case the distance between the lever and handlebar is adjusted shorter than the standard lever travel range, the clutch switch may be prevented from operating. Use at a distance where the switch will operate properly. ●The brake lever type depends on the type of remote wire (optional) that can be used.Each remote cable does not have any compatibility. ・RS Remote wire：Type which require the working length of the wire ・Standerd Remote wire:Type dedicated set by the length of the wire.Can not be used with the RS racing spec lever.(They are not compatible.)